CHARACTER Single beam/double beam light automatic optional, flexible distance election. Composed of a pair of transmitting and main controllers,has the advantages of long transmitting distance, flexible installation and flexible wiring of light eyes. Can effectively overcome the sensor from blind spots.Send Inquiry
218D Safety Beam sensor
11 years experiences, 1 year warranty and all life technology support
Widely used for automatic door security, anti clamp, person or object can be accurately and reliably detected。
Current：45mA(stand by) / 86mA(operation)
Output：contact 1A 24VDC
Power supply：AC/DC 12-36
Contact output status：Normally open/normally closed optional
Standard cable：（single cable）Length 5.5m
Six to choose us
Design installation location: installation of automatic door safety in the design of electric eye (safety light), the need to consider the electric eye position, it is usually safe in the design of electric eye induction door fixed on the two sides of the door of the outside of the post (generally in suspension for the opening, inside) so that we can avoid the movable door swing safety electric eye on the radio, on both sides of the column the relatively large size, easy to choose the installation position of punch. If it is around the border have automatic door frame, can also be installed in the middle of the vertical frame fixed on the door leaf, so shooting distance for electric eye focus, but need to consider in advance to avoid circuit wiring, can be exposed to touch the door leaf. The following is a schematic diagram of the installation of a secure light.
Safety electric eye (safety light) construction: 1. head electric eye when installed, the borehole diameter is 13MM
When single beam is light, it is recommended to install height from the ground: when 60CM double beam, one set of ground height 30CM, and another set of ground height 90CM
2. when the single beam is selected, the receiver must be connected to the main terminal of the 8 terminal, or the receiving terminal will cause the control failure.
The first 3. electric eye on the radio transceiver, automatic capture range, but please be sure to install it, to ensure the consistency of the horizontal and vertical direction.
Between the first 4. electric eye on the radio transceiver, usually should be potted plants or other pilings so as to avoid blocking the misoperation.